What is the difference between HVLP and LVMP?

LVMP spray guns take a smaller volume of air and produces a medium pressure. In essence, it uses less air than an HVLP air cap but with a slight bit more pressure than HVLP. The end result is that transfer efficiency is similar to HVLP air guns (around 60%).

Table of Contents

How do you thin water based lacquer?

You can thin water-based finishes with water to improve atomization, but the thinning is different than with lacquer. Very little water makes a much bigger difference than lacquer thinner in lacquer. So try 5 percent or so at first and see how this works.

Is water based lacquer any good?

Water-based finishes often contain coalesced particles that can mess up your finish; that isn’t the case with lacquer. So it’s doubly important to strain water-based finishes before using. While these characteristics can be seen as negatives, water contributes one very important positive quality: lower odor.

What type of sprayer is best for lacquer?

Best Lacquer Sprayers

Best Overall: FUJI Semi-Pro Gravity HVLP Spray System. If you are a beginner or hobbyist, this is your number one product.
Best Budget: GRACO MAGNUM Project Painter.
Best High End: INGERSOLL Rand Edge Series.
Pressure Rating.
Capacity.
Dismantling.
Nozzle or Tip Size.

Which is better LVLP or HVLP?

HVLP guns use more CFM and will require users to size their air compressor accordingly. On the other hand, LVLP atomizes better, sprays faster and lays down a better finish while using less CFM but high air pressure.

How do you apply water based lacquer?

Always raise the grain on raw wood before applying a water-based finish. Simply brush, sponge or spray on some distilled water and let it dry thoroughly (overnight is best). Then, resand with your final grit paper to break off the whiskers. Now when you apply the finish, the grain will stay down.

Do I need to thin water based paint for spraying?

Is it necessary to Thin Latex Paint for Spraying? Yes, the latex paint does need to be thinned. Even though latex paint is water-based, it is thicker than the oil-based paint varieties. The thick latex paint needs to be thinned to be able to spray a fine mist of paint.

Can you thin water-based lacquer?

Is water-based lacquer any good?

Is water based lacquer better than oil based?

Durability. Oil-based polyurethane is more durable than his water-based alternative since it contains a significant amount of Volatile Organic Compounds (VOCs). Those chemicals make the finish tougher and allow it to last longer.

What is water based lacquer used for?

This range of water based lacquers are a durable lacquers for interior woodwork including furniture and shop fittings. Provides a durable, and long lasting finish with excellent clarity and brightness. The water based formula is a low odour and non-yellowing, it is also resistant to blocking, with no need for a sealer.

Can you spray lacquer with a paint sprayer?

Because of their thick and sticky consistency, lacquers are best applied using a paint sprayer. It is important to know that the best paint sprayer for lacquer will take care of shellac, nitrocellulose lacquer, and every single type of finish.

What is the best tip size for spraying lacquer?

Spray Tip Chart – Sizing Guide

Material Type	Tip Size	Material Thickness
Shellac	009 – 013	Thin
Transparent Stain	009 – 013	Thin
Water Sealers	009 – 013	Thin
Water borne Lacquer	012 – 014	Medium