DuraBlack® is CO2 laser markable aluminum for durable, on-demand marking for harsh operating environments. In side-by-side tests, DuraBlack outperforms black anodized aluminum and laser markable acrylic tape in select applications.
Table of Contents
What is Dura black?
DuraBlack® is CO2 laser markable aluminum for durable, on-demand marking for harsh operating environments. In side-by-side tests, DuraBlack outperforms black anodized aluminum and laser markable acrylic tape in select applications.
How do you cut DuraBlack?
Carefully use a hacksaw or tin snips to cut DuraBlack pipe. However adjustable slip Sections are available.
How hot does Duravent get?
Temperature rating of 1000°F Max continuous; 1400°F brief forced fired; and 2100°F 30 minutes tested. The inner liner is made of corrosion-resistant stainless steel, helping to deliver better protection of the exterior finish.
Can pellet stove pipes cut double wall?
Please note: Double Wall Stove Pipe cannot be cut and still provide a proper connection to an adjoining piece of pipe. If necessary, use an adjustable length of double wall stove pipe.
Is drywall OK behind wood stove?
Drywall is combustible and not a suitable material either for use behind the wood stove or for use underneath tile. Removing it from the wall behind the wood stove allows you to install cement backerboard instead. Cut right through the drywall using a drywall saw.
How long does a stainless steel chimney last?
15 to 20 years
Stainless steel flue liners generally last for 15 to 20 years (though low quality liners may not even last for five). Good quality stainless steel chimney liners often come with a lifetime warranty.
What kind of chimney do I need for a pellet stove?
Venting: Unlike wood stoves, pellet stoves do not need a chimney and can be vented out through a side wall.
Can you use a wood stove pipe for a pellet stove?
Typically with the Type L (low temperature) listing, the flue gases must not exceed 570 degrees Fahrenheit for Pellet Vent Pipe. Therefore, this is not a viable option for mini wood stoves that commonly reach temperatures of 400 – 800 degrees Fahrenheit.
Can I use cement board behind my wood stove?
Safe wood stove installations require a heat shield that will prevent heat from the wood stove from creating a fire hazard in the building materials that form the exterior wall. Hardi cement board is an inexpensive solution that will form the foundation of an effective heat shield for any application.
What should I put on the wall behind my wood stove?
Common fireproof wall ideas for behind a stove include stone, brick and tiles. The look of a wood burning stove can be enhanced by using a faux panel (such as a stone veneer look) or using a fireback.
How often should a chimney be relined?
Suffice to say, when you adhere to recommended chimney maintenance practices, your liner can last for 20 to 50 years. With this, it can be said that getting chimney relining services is not something that is done often.
Do you need to clean a stainless steel chimney liner?
Sometimes it is a requirement of the manufacturers warranty to make sure the chimney pipe is inspected and cleaned, as necessary. It is important to sweep the liner with the proper type and size brush.
Do pellet stoves need a flu?
Pellet stoves do not necessarily need a chimney, but will need a form of flue to be installed to safely remove waste air from a home. A pellet stove can either be installed within an open fireplace and utilize an existing chimney with a flue liner, or can be vented out an external wall of a home.
Does a pellet stove use a lot of electricity?
Do Pellet Stoves Use A Lot Of Electricity? Pellet stoves can use on average just over 100W of energy during normal use but up to 500W during ignition of a fire. A pellet stove can use on average 1kWh of energy per day if used for 8 straight hours.
Does a pellet stove need a cold air intake?
Waste air from a pellet stove must be vented to the outside of a home using a suitable form of flue, either within a masonry chimney, internally within a home or externally up an outside wall. Pellet stoves do not typically always require a direct vent for fresh air intake.
How far does a wood stove have to be from cement board?
A combustible floor must be protected by a non-combustible material (like tile, concrete board, or certified to UL-1618 or as defined by local codes) extending beneath the heater and a minimum of 6″ from each side and minimum 16″ from the front face of the stove and minimum 6″ (or the rear clearance to combustibles …
Is drywall OK behind a wood stove?
Drywall is combustible and not a suitable material either for use behind the wood stove or for use underneath tile. Removing it from the wall behind the wood stove allows you to install cement backerboard instead.
What is the average cost to reline a chimney?
between $2,500 and $7,000
The cost of relining a chimney varies. Typically, the cost can be anything between $2,500 and $7,000. Ultimately the cost will be determined by the type of lining you would want to have installed. Knowing what lining is can help you understand the cost involved.
Can I reline my chimney myself?
Yes it can – and will! While having your chimney liner professionally installed can be more convenient but ends up being costly, averaging anywhere from $2,500 to $5,000. With our DIY Chimney Liner Kits you will have all the components needed to reline your chimney and you wont break the bank!