How do I reset my Dlink DIR-615 router?

To reset the D-Link DIR-615 to its default settings, you have to do the following steps:

1. Put router into operation.
2. Press RESET button and hold for at least 10 seconds.
3. Restart of the device is automatically executed.
4. Default settings have been restored.

How do I enable WPS on my Dlink DIR-615?

To use, simply press the WPS button on your router or access point, and then press the WPS button on your wireless client (sometimes may be enabled by software) within 2 minutes. The router/access point will automatically configure your client with your Wi-Fi name (SSID) and Wi-Fi password.

What is the default password for Dlink DIR-615?

Every version of the D-Link DIR-615 router has a default username of Admin and, like most D-Link routers, no default password. The default IP address used to access this router is 192.168. 0.1.

How do I configure my D-Link wireless router?

Setting up a D-Link Router

1. Open the router in a new browser tab. Open your browser and navigate to http://192.168.0.1, the default IP address of the D-Link router.
2. Enter the D-Link router password.
3. Setup a strong password.
4. Select your Timezone.
5. Configure your internet connection.

What to do after resetting the router?

After pressing the Reset button, unplug and re-plug the router’s power adapter. NOTE: The Power LED of the router will keep on blinking for a few seconds after resetting as it is still trying to stabilize. However, if the Power light still isn’t solid after a minute, powercycle the router.

What does WPS mean on a router?

Wi-Fi® Protected Setup
Wi-Fi® Protected Setup (WPS) is a built-in feature of many routers that make it easier to connect Wi-Fi enabled devices to a secure wireless network.

How do I change my Dlink DIR 615 WIFI password?

How do I change my D-Link Router’s password?

1. Step 1: Open your Internet browser and enter.
2. Step 2: Enter the password for your Admin account in the field provided.
3. Step 3: Locate the Wireless Settings from the drop down menus.
4. Step 4: In the Password field, specify the new wireless password for the desired wireless band.

Why is my DLink router not connecting to the Internet?

If Disconnected- please try the steps below: – Power Off your Internet Modem (Not the D-Link Router) for 20 seconds and then power it back on. Wait up to 2 minutes and check the Network Status again. If the status changes to Connected, your internet should be working.

Why is my router not connected to the Internet?

the first thing you’ll want to do is try and restart your router. Sometimes, routers just seem to need to be rebooted occasionally to keep working well. It is quick and easy to reboot your router. Usually, you just unplug the power cable, give it a couple of seconds, and then plug it back in.

What is the D-Link admin password?

blank
The default user name for the D-Link DI-624 wireless router is “admin,” and the Password field should be left blank.

What happens if we press WPS button on router?

The WPS button simplifies the connection process Press the WPS button on your router to turn on the discovery of new devices. Then, go to your device and select the network you want to connect to. The device is automatically connected to the wireless network without having to enter the network password.