How do I fix the PE code on my LG washer?

The PE error code indicates that the water level sensor is malfunctional. To fix this: Unplug the washer for 10 seconds. Plug the washer back in, and restart the cycle again.

How do I fix the PE code on my LG washer?

The PE error code indicates that the water level sensor is malfunctional. To fix this: Unplug the washer for 10 seconds. Plug the washer back in, and restart the cycle again.

What is the PE code?

For realtime streaming data, the PE code represents a Permissionable Entity code – i.e. codes that are used to control and verify a users entitlement to a particular instrument or item of data and is used by our Data Access Control System for this purpose.

What are the codes for a LG washer?

Select LG error code on your display:

  • FE – Water Overflow Error.
  • OE – Drains Slowly.
  • IE – Inlet Water Supply.
  • UE or UB – Unbalanced Load.
  • CL – Child Safety Lock.
  • LE – Locked Drive Motor.
  • tCL – Tub Clean Cycle.
  • dE – Door is Open.

How do I fix a PE error on my Samsung washing machine?

To fix the error code PE/PE1

  1. Unplug the washing machine for 30 – 60 seconds then start the washing machine again and choose the program.
  2. If still the error code showing on the display that means the washing machine needs to be service.

How do I reset my LG washer?

A washing machine is reset by pressing power off/on button on the control panel & disconnecting it from power board for a few minutes. Reconnect and switch on again. it can be completely cleared with all of the settings renewed.

How do I put my LG washer in diagnostic mode?

Press the POWER to turn on the washer. Place the mouthpiece of your phone between the Smart Diagnosis logo and the POWER button. After pressing the Start Diagnosis button, press and hold the TEMP button until a countdown displays on the washer.

How do I reset my LG automatic washing machine?

A washing machine is reset by pressing power off/on button on the control panel & disconnecting it from power board for a few minutes. Reconnect and switch on again. it can be completely cleared with all of the settings renewed. If Still Issue not resolve ..