How do I assign an IP address to a firewall in ASA?

Set a Static IP for your Cisco ASA5505 Firewall

How do I assign an IP address to a firewall in ASA?

Set a Static IP for your Cisco ASA5505 Firewall
  1. Open the ASDM and log into your device.
  2. Under Configuration, Interfaces, select the Outside interface and hit Edit.
  3. In the ‘IP Address’ box, click the radio for ‘Use Static IP’
  4. Select an IP address, and use ‘255.255.
  5. Hit ok, then apply.

How many physical ports are there on firewall ASA 5505?

8-port
Introducing the Cisco ASA 5500 Series Firewall Appliance

Feature Cisco ASA 5505 Cisco ASA 5510
Integrated Network Ports 8-port Fast Ethernet switch (including 2 PoE ports) 5 Fast Ethernet ports; 2 Gigabit Ethernet + 3 Fast Ethernet ports*
Virtual Interfaces (VLANs) 3 (no trunking support)/20 (with trunking support)* 50/100*

How configure firewall in ASA step by step?

Cisco ASA 5505 configuration

  1. Step1: Configure the internal interface vlan.
  2. Step 2: Configure the external interface vlan (connected to Internet)
  3. Step 3: Assign Ethernet 0/0 to Vlan 2.
  4. Step 4: Enable the rest interfaces with no shut.
  5. Step 5: Configure PAT on the outside interface.
  6. Step 6: Configure default route.

What are the steps to configure firewall device?

How to Configure a Firewall in 5 Steps

  1. Step 1: Secure your firewall.
  2. Step 2: Architect your firewall zones and IP addresses.
  3. Step 3: Configure access control lists.
  4. Step 4: Configure your other firewall services and logging.
  5. Step 5: Test your firewall configuration.

Is Cisco ASA 5505 a switch?

The ASA 5505 supports a built-in switch. There are two kinds of ports and interfaces that you need to configure: Physical switch ports—The ASA has 8 Fast Ethernet switch ports that forward traffic at Layer 2, using the switching function in hardware.

How configure firewall in Asa?

Cisco ASA 5505 configuration

  1. Step1: Configure the internal interface vlan.
  2. Step 2: Configure the external interface vlan (connected to Internet)
  3. Step 3: Assign Ethernet 0/0 to Vlan 2.
  4. Step 4: Enable the rest interfaces with no shut.
  5. Step 5: Configure PAT on the outside interface.
  6. Step 6: Configure default route.
  7. 13 comments.

What is inside and outside interface in firewall?

The ASA creates three security interfaces: Outside, Inside, and DMZ. It provides outside users with limited access to the DMZ and no access to internal resources. Inside users can access the DMZ and outside resources. The focus of this lab is the configuration of the ASA as a basic firewall.

How do I set a simple firewall?

Setting Up a Firewall: Windows 7 – Basic

  1. Set up system and security settings. From the Start menu, click Control Panel, then click System and Security.
  2. Select program features. Click Turn Windows Firewall on or off from the left side menu.
  3. Choose firewall settings for different network location types.

How do I learn Cisco ASA firewall?

Introduction

  1. Day 0 : Introduction of the Course and About Me.
  2. Chapter 2 – Cisco ASA Basic Lab.
  3. Chapter 3 – Permit ICMP and configure Static Routing.
  4. Chapter 4 – Basic Stuff of ASA and Packet-Tracer command.
  5. Chapter 5 – Enabling Telnet Access on Cisco ASA Firewall.
  6. Chapter 6 – Enabling SSH Access on Cisco ASA Firewall.

How many interfaces are on a firewall?

two interfaces
All firewalls have at least two interfaces: Inside—The inside interface is typically assigned a static IP address (and this IP address typically comes from one of the three private IP address blocks—10.0. 0.0/8, 172.16.