How do I reload PulseAudio?

Restart pulseaudio failed. what are the alternatives?

1. Kill the service using the command in Terminal: systemctl –user stop pulseaudio.socket.
2. Remove off the plugins: rm -rf .config/pulse.
3. Start PulseAudio again: pulseaudio –start.

Do I need to restart PulseAudio?

Restarting PulseAudio

• Open the ~/.pulse/client.conf file to enable PulseAudio for the current user, OR. Open the /etc/pulse/client. conf file to enable PulseAudio for all users.
• Set the following attribute and ensure the line is not commented out: autospawn = yes.
• Call pulseaudio –start to start the PulseAudio daemon.

How do I restart ALSA and PulseAudio?

If Ubuntu is still using Alsa for its sound engine (I’m not sure as its been awhile since I’ve used it), you can restart by typing sudo /etc/init. d/alsa-utils restart into the terminal.

How do I fix PulseAudio not working?

If Pulseaudio does not correctly detect your input / output devices (“sources” and “sinks” in Pulseaudio parlance), you can try deleting the configuration files and restarting pulseaudio. This is probably unnecessary overkill, but might help some people.

How do I restart PulseAudio manjaro?

As you’re on KDE like me, that’s exceedingly simple:

1. Execute: sudo nano –backup /usr/local/bin/PulseRestart.
2. Copy-paste the following in there: #!/bin/bash sleep 5 systemctl –user restart pulseaudio.service.
3. Make this text file an executable file: sudo chmod a+x /usr/local/bin/PulseRestart.
4. And now go to System Settings.

How do I reinstall ALSA?

“how to reinstall alsa” Code Answer

1. sudo apt-get remove alsa-utils.
2. sudo apt-get remove alsamixer.
3. sudo apt-get install alsa-utils.
4. sudo apt-get install alsamixer.

Does PulseAudio need ALSA?

Remember that Alsa is not removed when installing Pulseaudio. Pulseaudio uses Alsa in quite some extent and you could say it’s a layer on top of Alsa. There’s pavucontrol (on Debian/Ubuntu also the package name).

How do I fix sound on Linux?

How to Fix Broken Audio in Headphones and Speakers in Linux

1. Step 1 – Open the terminal / console.
2. Step 2 – Open Alsamixer. We will use alsamixer to tweak the audio settings.
3. Step 3 – Set Preferred Sound Card. Now you need to select your preferred sound card.
4. Step 4 – Save Settings.

How do I start PulseAudio Arch?

How to use PulseAudio in ArchLinux

1. Step 1: Update the Package database. First, update the package database to refresh the listing.
2. Step 2: Install PulseAudio. Next, enter the following command to install PulseAudio:
3. Step 3: Activate Graphical User Interface.
4. Step 4: Getting started with PulseAudio.

How do you fix ALSA?

Check the ALSA Mixer

1. Select your correct sound card by pressing F6 .
2. Use the left arrow and right arrow keys to select a volume control.
3. Use the up arrow and down arrow keys to increase and decrease volume levels for each control.
4. When a mixer control is muted, “MM” appears below the volume bar.

How do you fix sound problems?

Fix sound or audio problems in Windows

1. Check your speaker output.
2. Run the audio troubleshooter.
3. Verify that all Windows Updates are installed.
4. Check your cables, plugs, jacks, volume, speaker, and headphone connections.
5. Check sound settings.
6. Fix your audio drivers.
7. Set your audio device as the default device.

How do I fix sound on Ubuntu?

Content

1. Install Volume Control for PulseAudio.
2. Check Your Speaker Settings.
3. Check the ALSA Mixer.
4. Reload ALSA.
5. Reinstall ALSA and PulseAudio.
6. Advanced Troubleshooting.
7. Frequently Asked Questions.

How do I reinstall PulseAudio Arch Linux?

How do I open PulseAudio in Ubuntu?

It is available in the official package repository of Ubuntu 18.04 LTS, but not installed by default. Now press y and then press to continue. PulseAudio Volume Control should be installed. Now you can open PulseAudio Volume Control from the Application Menu of your Ubuntu 18.04 LTS.