One of the most overlooked benefits of aftermarket upper control arms is they allow for proper wheel alignment. With some lifted vehicles it can be difficult (if not impossible) to align them back to factory specs. Aftermarket arms solve this by having a slightly different geometry than the factory ones.

Is upgrading your upper control arms worth it?

One of the most overlooked benefits of aftermarket upper control arms is they allow for proper wheel alignment. With some lifted vehicles it can be difficult (if not impossible) to align them back to factory specs. Aftermarket arms solve this by having a slightly different geometry than the factory ones.

Do performance control arms make a difference?

The most common reason to replace a control arm is to improve wheel travel as part of a suspension lift. However, a new control arm can offer more than just increased ride height (lift) and additional wheel travel: Increased durability in the arm itself. A wider range of uniball/ball joint options.

Does Dodge Ram have plastic control arms?

The OEM front upper control arms for 2019+ RAM 1500 (5th generation) are characterized by a non-greaseable plastic “liner” type bearing and composite two-step process. This hybrid design involves bonding a type of plastic to a thin layer of hollow stamped steel across the entire control arm body.

Should you replace both control arms at the same time?

It’s not necessary to replace both, left and right arms if one is bad. Often, however, if one arm is worn out, it’s reasonable to expect that another control arm will likely need replacement soon. In this case, it’s makes more sense to replace control arms on both sides at the same time.

Do I need an alignment after replacing upper control arm?

Do you need an alignment after replacing the upper control arms? The need for calibration after lowering the car is not the same as replacing the upper arm. If you’re just replacing your upper arm, you shouldn’t worry about alignment unless your old arm is badly worn and has significant play.

Do you need an alignment after replacing upper control arms?

How much does it cost to replace a control arm?

between $500 and $750
On average, you can expect a car control arm replacement to cost between $500 and $750. Depending on your vehicle make and model—prices may also vary slightly depending on whether it is a front or rear control arm that needs replacing.

How much does it cost to replace upper control arm?

Replacing a lower or upper control arm can cost from $160 to $390 for one arm. It’s not necessary to replace both, left and right arms if one is bad. Often, however, if one arm is worn out, it’s reasonable to expect that another control arm will likely need replacement soon.

Do you need an alignment after replacing lower control arms?

The need for calibration after lowering the car is not the same as replacing the upper arm. If you’re just replacing your upper arm, you shouldn’t worry about alignment unless your old arm is badly worn and has significant play.

What is better toe in or toe out?

Generally the rule of thumb is that more toe-in increases understeer and more toe-out increases oversteer. However, with modern cars, especially race cars with independent front and rear suspensions, there is another effect on handling.

Can I replace a control arm myself?

If you have any doubts, it’s a good idea to leave the job to a professional. You’ll save yourself a lot of blood, sweat, and tears. If you have any doubts you can pull off control arm replacement yourself, it’s best to leave the job to a professional mechanic.

How long does a control arm take to replace?

However, control arm bushings need to be pressed in with a special tool or press, which takes some time and adds the labor cost. Is a control arm easy to replace at home? On the difficulty scale from 1 to 10, replacing a control arm is 7 or 8. In the shop, it takes about 1-1.5 hours to replace one control arm.

How long do control arms last?

between 90,000 and 100,000 miles
Over time, the control arm assembly can become worn or bent. These assemblies normally wear out between 90,000 and 100,000 miles. They can wear out faster if you go over a large pothole or are involved in a car accident. Various parts of the assembly may wear out as well, such as the bushings or ball joints.

Is replacing a control arm hard?

Control arm replacement can be difficult—especially if the vehicle’s suspension is rusted and corroded. Separating the ball joint from the steering knuckle can be tricky, too, if you’ve never done the job before. And, oh yeah, you’ll want to get your car’s alignment checked after replacing the control arm.

How much does it cost to replace control arms?

Are control arms easy to replace?

Should I replace both control arms?

Ball joints typically cannot be replaced separately, so the entire control arm needs to be replaced. The ball joints are critical to vehicle alignment, so these control arms should also be replaced in pairs. Inspect the ball joint boot and look for signs of dry rotting or cracks, as well as leaking grease.

Should I replace both control arms at the same time?

It is not necessary to replace both lower or both upper control arms if one is bad, but often they wear out at roughly the same mileage. If one control arm is bad and the other is on its way, it makes sense to replace both arms at once. This way, you only need to do the wheel alignment once.