How long does a Trophon cartridge last?

35–40 cycles
If the trophon EPR is left switched on, each cartridge should deliver 35–40 cycles under normal operating conditions (dependant on use), provided the cartridge does not expire beforehand.

How does a Trophon work?

trophon devices have high-frequency ultrasonic vibrations that generate a ‘sonically activated’, hydrogen peroxide (H2O2) mist that kills bacteria, fungi and viruses. trophon devices have a unique automated system that uses ultrasonic vibration to convert high concentration hydrogen peroxide into mist particles.

What is Sonex HL?

Trophon Sonex-HL Disinfectant Probe For EPR System, Trophon 2 35% Hydrogen Peroxide 80mL Non Sterile 6/Case. Medical Diagnostic & Emergency / Diagnostic & Med Equipment.

What chemical is used in Trophon?

The solution helps link the probe and HLD cycle date and time with the patient and medical procedure. The trophon EPR uses nebulized hydrogen peroxide mist which is broken down into harmless, environmentally friendly by-products: water and oxygen.

How much does Trophon cost?

The initial cost for both systems was $17,400 and the Powell Medical Foundation and PVHC Employees provided funding for the two systems. Clinical research has demonstrated that the Trophon EPR system is the only high-level disinfection system proven to kill high-risk, cancer-causing HPV (human papillomavirus).

What do nanosonics do?

Nanosonics is an Australian infection prevention company that has successfully developed and commercialised a unique automated disinfection technology, the trophon® device, representing the first major innovation in high level disinfection for ultrasound probes in more than 20 years.

What is a trophon2?

Distributed by GE Healthcare, trophon2 is an automated high level disinfection for endocavitary probes. Smart Protection – trophon2 contributes to protect patients, caregivers and the environment by helping to reduce risk10.

Does a Trophon sterilize?

trophon® EPR is a high level disinfection system that is fast and simple. Disinfection takes place in an automated, closed system and uses a vaporized hydrogen peroxide solution.

How do you clean a vaginal probe?

Cleaning and Low-Level Disinfection Remove the transducer connector from the scanner, then preclean the probe by rinsing it under running water to remove residual gel and organic matter. 2. Thoroughly clean the probe using a nonabrasive liquid soap on a damp, soft cloth or gauze pad.

How do you disinfect a vaginal ultrasound probe?

“Transducers should be cleaned after each examination with soap and water or quaternary ammonium (a low-level disinfectant) sprays or wipes. The transducers must be disconnected from the ultrasound scanner for anything more than wiping or spray cleaning.

Is Nanosonics a good investment?

Is Nanosonics still cheap? Nanosonics appears to be overvalued by 24% at the moment, based on my discounted cash flow valuation. The stock is currently priced at AU$5.32 on the market compared to my intrinsic value of A$4.29. This means that the buying opportunity has probably disappeared for now.

Who are Nanosonics competitors?

Nanosonics’s top competitors include SurModics, Auris Health, K2M Group and Globus Medical. Nanosonics is a company that specializes in the field of infection prevention.

Is a Trophon a sterilizer?

Is a transvaginal ultrasound sanitary?

Since handling of the probe, ultrasound gel and cover can result in smear infections and cross-contamination with various pathogens (e. g. MRSA, HBV, HCV, HIV, herpes papilloma and cytomegalic viruses), after the protective cover is removed, the probe must be cleaned and subjected to disinfection with a bactericidal.

Do I need to wash off ultrasound gel?

If large amounts of ultrasound gel are present, wipe off using a dry paper towel. Thoroughly clean all external magnet surfaces using either a soft cloth dampened with cleaner or a premoistened wipe for at least 30 seconds. Water (room temperature from potable water source) or isopropyl alcohol is acceptable.

Are ultrasound probes cleaned?

All ultrasound probes must be cleaned after each patient. The general cleaning process is as follows: 1. Remove the transducer connector from the scanner, then preclean the probe by rinsing it under running water to remove residual gel and organic matter.

Why are Nanosonics shares dropping?

Why is the Nanosonics share price falling? The weakness in the Nanosonics share price on Wednesday has been driven by the release of a business update. This update was in relation to the company’s direct sales model transition in North America which was announced in February.