Configure WAN group VPN on the SonicWall appliance

How do I connect my SonicWall to global VPN client?

Configure WAN group VPN on the SonicWall appliance

1. Login to the SonicWall management GUI.
2. Click QUICK CONFIGURATION.
3. Select VPN Guide and click Next.
4. Select WAN Group VPN and click Next.
5. Select Use this preshared key, click Next.
6. Select the options for the security settings and click Next.

Does SonicWall VPN split tunnel?

SonicWall can support both Split Tunnel and Route All modes.

How do you troubleshoot common VoIP issues on SonicWall?

Issue – Packet Loss or Quality Issues for VoIP over VPN

1. Navigate to Manage | VPN | Advanced ensure Enable Fragmented Packet Handling is checked while Ignore DF Bit is unchecked. Ensure Enable NAT Traversal is also checked.
2. Navigate to Manage | VPN | Settings and Configure the VPN policy for the VoIP traffic.

How do I Prioritise my VoIP traffic?

Prioritize VoIP Traffic by QoS

1. Go to Bandwidth Management >> Quality of Service, check Enable for the WAN interface that will have VoIP traffic.
2. At the bottom of the page, check Enable the First Priority for VoIP SIP/RTP.
3. By clicking this green icon, you can see the status and analysis graph of each phone call.

What is QoS Sonicwall?

Description. Quality of Service (QoS) adds the ability to recognize, map, modify, and generate the industry-standard 802.1p and Differentiated Services Code Points (DSCP) Class of Service (CoS) designators.

What is the difference between global VPN and SSL VPN?

2) The main differences to consider are the end clients that they support and the data transfer rates. –GVC can only be used for Windows clients whereas SSLVPN can be used for MAC, Windows, and Mobile devices.

How does SonicWall Global VPN Client work?

The SonicWall™ Global VPN Client creates a Virtual Private Network (VPN) connection between your computer and the corporate network to maintain the confidentiality of private data. The Global VPN Client provides an easy-to-use solution for secure, encrypted access through the Internet for remote users.

How do I enable split tunneling in SonicWall VPN?

Resolution for SonicOS 6.2 and Below Navigate to VPN | Settings screen and edit the WAN GroupVPN, on the WAN GroupVPN policy, on the Client tab, set Split Tunnel in the section Allow Connections to.

How do I force traffic through VPN?

Navigate to VPN | Base Settings and create the VPN policy for Remote site. You can name the policy as VPN to Central Network. Select Network tab and under Local Networks you can chose X0 Subnet. Under Remote Networks, select Use this VPN Tunnel as default route for all Internet traffic.

What software do you use for troubleshooting VoIP?

If you’re exclusively on the market for the best free VoIP monitoring tools, then SolarWinds Call Detail Record Tracker is the obvious choice. This software gives you maximum insight at no cost, letting you investigate and analyze key call quality metrics like latency, jitter, packet loss, and MOS.

What are the disadvantages of voice over IP VoIP?

The main disadvantage of VoIP compared to traditional lines is that it is totally dependent on the strength of your broadband connection. No internet equals no VoIP phone service. It does not end there either. Poor internet connection can also affect call quality and lead to problems like jitter and latency.

Is QoS needed for VoIP?

Finally, QoS applied to wireless access points can ensure VoIP bandwidth needs gets priority when the Wi-Fi network is congested. In the WAN, QoS is still necessary, as well, both to avoid jitter-related issues and minimize latency by prioritizing the handling of VoIP packets at WAN routers.

What are two QoS requirements for VoIP traffic choose two?

QoS Requirements of VoIP

• Voice traffic should be marked to DSCP EF per the QoS Baseline and RFC 3246.
• Loss should be no more than 1 percent.
• One-way latency (mouth to ear) should be no more than 150 ms.
• Average one-way jitter should be targeted at less than 30 ms.

How do I disable SIP ALG in Sonicwall?

Disabling SIP ALG for Sonicwall Routers From the Sonicwall main menu, select VoIP, then choose Settings. Find the setting for SIP (or SIP transformations) and uncheck the box, then check Enable consistent NAT and choose save.

What type of VPN is SonicWall?

SonicWall’s SSL VPN features provide secure remote access to the network using the NetExtender client. NetExtender is an SSL VPN client for Windows or Linux users that is downloaded transparently and that allows you to run any application securely on the company’s network. It uses Point-to-Point Protocol (PPP).

What is the difference between SSL VPN and Global VPN in SonicWall?

Is SonicWall still owned by Dell?

Dell has successfully completed the acquisition of SonicWALL, Inc., a leader in advanced network security, secure remote access, and data protection.

How does VPN split tunneling work?

Split tunneling is a VPN feature that divides your internet traffic and sends some of it through an encrypted virtual private network (VPN) tunnel, but routes the rest through a separate tunnel on the open network. Typically, split tunneling will let you choose which apps to secure and which can connect normally.