Are RCDs mandatory in WA?

RCD regulations in WA Depending on the layout of the property, Western Australian state law requires every dwelling to have a minimum of two RCDs installed before the property can be sold or rented. In Western Australia, all properties constructed after 2000 should already have two RCDs fitted.

Is RCD a legal requirement?

This is a legal requirement. In domestic properties, situations requiring mandatory RCD protection include: Properties supplied by a TT earthing arrangement (one with a local earth terminal, as opposed to an earth being provided by the distributor). This typically includes rural locations fed by overhead cables.

Where should RCD be fitted?

RCDs are very sensitive and should be installed on your fuseboard to provide the greatest protection. You can also find RCD switches on sockets, as well as on portable devices that can be plugged into standard sockets.

Is RCD required for EICR?

If the Electrical Installation Condition Report (EICR) is Satisfactory then you do not need to replace the consumer unit, even if it does not have RCD protection. RCDs are only required by law in new builds, additions/alterations or rewires.

Do you need RCD protection on an existing installation?

Previously, installation of an RCD could be avoided by labelling a socket to be used only for certain items. In the 18th Edition, this option has been removed, so RCD protection should be installed unless you have a documented risk-assessment demonstrating that it is not appropriate.

Do rented properties need RCD protection?

Although its strongly advisable to have RCD protection fitted in a rental property as it could save the tenant from a fatal electric shock as well as prevent a fire. Your legal duty of care is to provide a safe and habitable property.

When did RCD become mandatory?

The UK standard for safety – Since July 2008 virtually all circuits in new or rewired homes have been required to include an RCD under the latest edition of BS 7671.

What is the code for no RCD protection?

BPG4 recommends that the EICR code for no RCD in this instance would be a C3 – IMPROVEMENT RECOMMENDED. Be aware that a lot of electricians will code this as a C2 – POTENTIALLY DANGEROUS if there is no supplementary bonding.

Do all sockets need to be RCD protected?

With the 18th Edition, Regulation 411.3. 3 requires all socket-outlets in AC systems rated up to and including 32 A to be protected by a 30 mA RCD, the only exception being for installations other than in dwellings, where a documented risk assessment determines RCD protection is not necessary.

Does an RCD need an earth?

Without it, stray faulty voltages can go nowhere and every metal device in your house that has its metal case connected to the (non) earth, and metal pipes, etc will have 230V on it. Put the earth back and get someone who knows what they are doing*. PS The only way to test an RCD is with a proper RCD tester.

When did RCD protection become mandatory?

Since 1 May 1984, RCDs are mandatory for all rooms with a bath tub or a shower. Since June 2007 Germany requires the use of RCDs with a trip current of no more than 30 mA on sockets rated up to 32 A which are for general use.

Does a rented property have to have RCD protection?

In short No. Although its strongly advisable to have RCD protection fitted in a rental property as it could save the tenant from a fatal electric shock as well as prevent a fire. Your legal duty of care is to provide a safe and habitable property.

Do all circuits have to be RCD protected 18th edition?

There is still an exception to omit RCD protection where, other than BA1, BA3 or children (BA2, BA3) and mobile equipment (not exceeding 32 A) for use outdoors, a suitably documented risk assessment determines that RCD protection is not necessary.

Does every house have an RCD?

There are none! There is literally no excuse not to have this lifesaving device installed in your home. RCD’s are so essential, especially when anyone is conducting any electrical work in your home. There are three main types of RCD’s; fixed RCD’s, Socket-Outlet RCD’s and Portable RCD’s.

Do all circuits need to be RCD protected?

Separate RCD protection is not necessarily required for each circuit of an installation but, in order to minimize the likelihood and consequences of tripping, a single (‘front end’) RCD should not be used to protect all the circuits. Regulation number(s):

Do bathroom lights need to be RCD protected?

Electric showers require their own electrical circuit, which in general will have the highest electrical demand out of your household appliances. All circuits in a bathroom must be protected by a RCD (Residual Current Device).

Can you have 2 RCDs on the same circuit?

Hi, I have two 30mA RCDs in series, first one as the main switch in the house consumer unit covering all 11 circuits, second one as the main switch on a garage consumer unit, covering three circuits….See Also:

	Technical discussion forums
·	Other and general engineering discussions
	Archived categories

Will an RCD work without a neutral?

A RCD will still function without a neutral connection, however the test button may not operate. Some RCDs have the trip test circuit connected between phases while others are between phase and neutral.

Do lights need to be RCD protected?

4 RCD Protection for Domestic Lights. “Regulation 411.3. 4 specifies that additional protection from a 30mA RCD is now required for all lighting circuits in domestic properties, without exception.

Should my house have an RCD?

There is literally no excuse not to have this lifesaving device installed in your home. RCD’s are so essential, especially when anyone is conducting any electrical work in your home. There are three main types of RCD’s; fixed RCD’s, Socket-Outlet RCD’s and Portable RCD’s.